Dynavector
Renowned worldwide for their cutting-edge moving coil phono cartridges, Dynavector has been at the forefront of high-performance audio for over 30 years. Designed and manufactured in-house in Tokyo, Japan to bring out of the musical source - the turntable, Dynavector cartridges deliver exceptional accuracy, detail, and musicality, allowing vinyl enthusiasts to experience the full emotional depth of their record collections.
At any price point and turntable, Dynavector's innovative designs and advanced production techniques ensure unparalleled performance. With a steadfast dedication to the purity of sound, Dynavector will both move and excite the listener to new heights of listening pleasure.
If you are upgrading from an existing Dynavector cartridge? Contact us for information on Dynavector’s trade-in offer.
Dynavector Cartridges
The XV philosophy made whole. Every principle accumulated over decades, the open body, the 8 ALNICO magnets, the 4-part equaliser, the stable African Ebony and now the Special Annealing magnetic circuit, converges into one instrument of exceptional stability and musical integrity.
The soundstage is wide and naturally proportioned. Tonality is honest. The balance across the frequency spectrum is something you stop noticing because it simply sounds correct. The XV Prima is not a stepping stone. It is a destination.
From Dynavector
The original Te Kaitora moving coil cartridge was the result of collaboration between Dynavector Japan and Dynavector New Zealand. The Te Kaitora allowed analogue enthusiasts to embark on a voyage of discovery to the outer limits of vinyl reproduction.
The improved Te Kaitora Rua phono cartridge continues the journey by incorporating many of the newest features of its Dynavector stable-mates, the XV-1s and XX-2. The Te Kaitora Rua phono cartridge has even managed to improve on the original's silk-like treble and openness.
Note: Te Kaitora means "The Discoverer" in the language of the NZ Maori people, Rua, is “the second version”.
From Dynavector
Drawing on Dynavector's ‘dispersion theory’ that produced the original world first KARAT series Dynavector are indeed proud to announce the entirely new 17DX KARAT Diamond phono cartridge. As in the past KARAT series, the frequency response of the new KARAT 17DX at 20 to 20,000 Hz is ruler flat providing an extremely accurate groove tracking ability. However, several new features will ensure that the new 17DX phono cartridge will shortly gain the same legendary status and soon surpass its predecessors.
The rationale for the new KARAT 17DX phono cartridge was to significantly improve upon the now legendary original KARAT moving coil cartridge series. After exhaustive listening and technical research, the decision was made to incorporate a body machined from solid brass, Samarium-cobalt magnets for lower magnetic resistance, unmatched coil winding techniques, the incredible 1.7mm long cantilever with Micro Ridge stylus all combining in a brand-new KARAT 17DX phono cartridge that will delight the listener, providing clear and articulate reproduction of analog recordings without a hint of harshness in the high frequency range.
From Dynavector
Established in 1978, Dynavector has been at the forefront of high-end audio manufacturing, introducing a multitude of high-performance cartridges to the market. Dynavector's approach to development is deeply rooted in academic engineering theory, a tradition passed down by their founder.
Since the 1990s, Dynavector have pioneered the development of cutting-edge vibration systems, including ultra-fine wire high-output coils and gemstone cantilevers. Central to Dynavector's focus has been the refinement of magnetic circuits. As a result, Flux Damper to stabilise magnetic flux and Softened Magnetism to reduce magnetic flux fluctuations Dynavector developed and installed into their cartridges.
In 2024, Dynavector achieved a significant breakthrough by enhancing the physical properties of their magnetic circuits, resulting in unparalleled sound quality.
From Dynavector
The DV 20X2A phono cartridge is an entry-level model in the Dynavector MC cartridge series. Sharing the same base structure as the higher-end XX-2A and Te Kaitora Rua models, it features a solid aluminium alloy body, a hard aluminium cantilever, and a Micro-Ridge stylus tip.
The DV 20X2A is available in two types, allowing selection based on system compatibility. The 20X2A-L (low output model) delivers a standard MC cartridge output, while the 20X2A-H (high output model) is an MC cartridge designed to suit most MM inputs.
This cartridge is well suited for listeners seeking to explore the full potential of MC sound, as well as those looking to experience MC performance without the complexity of using an MC step-up transformer.
The high output 20X2A-H achieves an output voltage of 2.8mV, made possible by Dynavector’s renowned coil winding technology. By winding ultra-fine wire multiple times around the coil, the cartridge attains an output level equivalent to that of an MM cartridge. This allows connection directly to an MM phono input without requiring a head amplifier or step-up transformer.
The low output 20X2A-L produces a 0.3mV output voltage and uses the same PCOCC coil wire found in Dynavector's higher-end models. It is recommended for use with head amplifiers or MC step-up transformers that support a load impedance of 30 ohms or higher, ensuring compatibility with most such devices.
From Dynavector
The Dynavector 10X series is a high output Moving Coil (MC) Cartridge that has been acclaimed worldwide since its release in 1978, amazing the audio industry by unleashing something that was long considered a challenge for MC cartridges.
In both 1978 and 1981, the 10X series was honoured the Design and Engineering Award at Chicago CES (Consumer's Electronics Show) and has continued to captivate audiophiles around the world with its distinctive red body.
Since its debut, the 10X series has continuously evolved to deliver a better experience for Dynavector's users. In 2003, a solid aluminium head block was introduced for increased rigidity providing a better platform to secure with the headshell. In 2018, the 10X5 MkII replaced the traditional elliptical stylus tip with a "Shibata III" line contact stylus improving tracking ability.
Now, in 2025, the 10X series reaches new heights of performance with a newly developed magnetic circuit that incorporates Dynavector's proprietary "Special Magnetic Annealing" technology. The new 10XA model delivers exceptionally smooth and articulate analogue playback, offering a listening experience that goes far beyond what is expected from an entry-level cartridge.
From Dynavector
For nearly 50 years, Dynavector has dedicated itself to the art and science of analogue playback, continuously pushing the boundaries of what MC cartridges can do.
The ASKA is their entry-level MC cartridge, purpose-built to make that first step into MC as inviting as possible. Carrying the same design philosophy and craftsmanship as Dynavector’s higher-end models, it delivers the characteristic Dynavector sound - open, natural, and remarkably low in distortion - at an accessible price point.
From Dynavector
Dynavector Phono Stages
The P75 is a complete Phono solution in one compact unit. It is user adjustable and will handle virtually any type of cartridge on the market. The performance is noteworthy, with extreme RIAA accuracy, very low noise and outstanding dynamic range.
The P75 incorporates a unique feature called "Phono Enhancer" (PE) which extracts the current signal, improve the magnetic field in the cartridge itself, which in turn provides an even more musical performance.
The P75 mk4 introduces a new ultra-low noise power supply that is electrically isolated from the input power. It takes the low grade single voltage DC supply from the AC adapter and converts it to dual high voltages required for true professional quality audio reproduction. Power supply noise is virtually unmeasurable. The P75 does not have any mains frequency or other low frequency components in the power supply and so hum problems that plague conventional phono amplifiers are eliminated.
From Dynavector
Built on the same Special Annealing foundation as the Prima, but asking, “How far can this go?”
Research-grade ultra-high-purity iron responds to magnetic flux with minimum distortion. Ultra-fine coil on a precision cross-cut armature brings moving mass to its absolute minimum.
Quieter between the notes. More present within them. No compromise on material, no concession to cost. The XV Ultima is for the listener who has heard everything and is still looking.
From Dynavector